Orbit 62056 Guide d'installation télécharger pdf

START TIME

1. Turn dial to START TIME.

2. Using the +/- buttons, set your start time,

including AM and PM.

3. Turn dial to save changes

HOW LONG

1. Turn dial to HOW LONG.

2. Using the +/- buttons, select watering

duration from 1 to 240 minutes

3. Turn dial to save changes.

HOW OFTEN

1. Turn dial to HOW OFTEN.

2. Using the +/- buttons, set your watering

frequency. You can choose to water every 6

hours, 12 hours, or from 1 to 7 days.

NOTE: 1 is every day, 2 is every other day, etc.

3. Turn dial to save changes.

DIAL—Rotate the dial to customize your

watering schedule

RESET—Press to clear all programming

MANUAL/CLEAR—Press to water manually or to

clear programming within a speciﬁc program

+/- BUTTONS—Use these buttons to adjust time

and system setup

1 Outlet HOse Faucet timer

IMPORTANT PLEASE READ!

TIMER FEATURES

AUTO—Timer waters according to your

customized schedule

SET CLOCK—Set the time of day

START TIME—Select what time you would like

watering to start

HOW LONG—Determine how long to water

HOW OFTEN—Choose how often you will water

OFF—Turn off all watering

6:00

RESET

MANUAL

WHEN EXPECTING FREEZING

TEMPERATURES, TIMERS SHOULD

BE REMOVED FROM THE HOSE

FAUCET AND STORED INDOORS TO

AVOID POTENTIAL FREEZE DAMAGE.

FILTER TRAPS DIRT PARTICLES,

PROLONGING LIFE OF TIMER.

CLEAN FILTER REGULARLY AND

REPLACE IF WORN.

HOSE TAP

CONNECTION

+/-

BUTTONS

MANUAL/

CLEAR

FILTER

DIAL

RESET

QUICK START

INSTALLING THE BATTERIES

1. Remove the tray on the back of the timer by

sliding or pulling it out.

2. Insert two AA (1.5V) alkaline batteries

(not included) and replace the tray.

Note: Firmly replace the battery tray to ensure water resistance

and increase battery life. You will know the battery tray is fully

inserted if it locks in place and does not pull out easily.

Used up or dead batteries must be removed from the timer and

disposed of properly. Batteries should be removed from the timer

at the end of the watering season and replaced with new ones at the

beginning of the next watering season. Replace batteries when low

battery icon appears on display.

PROGRAMMING THE TIMER

SET CLOCK

1. Turn dial to SET CLOCK.

2. Using the +/- buttons, set the time of day,

including AM and PM.

3. Turn dial to save changes.

MINUTES

DAYS

OUTLET

Printers are responsible

for meeting print

production requirements.

Any changes must be

approved by Orbit

Printed piece must meet

designated specifications

on this form.

This work is the property

of Orbit

, and cannot be

used, reproduced or

distributed in any way

without their express

permission.

Dieline

PMS

0000

Fold

PMS

0000

Product

Coverage

PMS

0000

Dims./

Callout

PMS

0000



Orbit

1.801.299.5555

orbitonline.com

Glue

Folded Flat Additional Information

PRINTERS ARE

REQUIRED TO MATCH

ALL SPECIFIED

PMS COLORS.

DATE: 02/09/2014

DESIGNER: JC MARKETING: AY

SOFTWARE: Adobe Indesign CS6

ARTWORK №: 62061-24E rA

000.000" W:

H:3.0"

3.0"

12.0"

6.0"

1 2

Résumé du contenu

Page 1 - 1 Outlet HOse Faucet timer

START TIME1. Turn dial to START TIME.2. Using the +/- buttons, set your start time, including AM and PM.3. Turn dial to save changesHOW LONG1. Turn di

Page 2 - TROUBLESHOOTING

62061-24E rACongratulations! Your timer is now programmed. Turn your dial to AUTO to allow your timer to water according to programmed time, station,

Commentaires sur ces manuels

Pas de commentaire

Orbit 62056 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Minuteries électriques Orbit 62056. Orbit 62056 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Minuteries électriques Orbit 62056